IBM SAN Switch Update Prozedur (Brocade)
- Update Prozedur
- Konfigurationsbackup
  - Firmware-Update
  - Update Prozess

IBM SAN Switch Update Prozedur (Brocade)

Einstiegsseite für aktuelle Firmware (Brocade)
IBM Brocade Firmware 5.x Website

Fabric OS v5.0.4a (tar.gz) 166MB Fabric OS v5.0.4a (zip) 166MB
IBM eServer BladeCenter Design, Deployment and Management Guide Version 1.0 (ZIP, 2.8 MB)

Support for 2005-H08 & H16 SAN Fibre Channel Switch

Update Prozedur

Folgende Accounts existieren: user, admin, factory, root (manchmal auch noch USERID), das default-Passwort ist “password“.

Login als admin - version

Kernel:     2.4.19
Fabric OS:  v4.4.0
Made on:    Thu Oct 21 19:32:35 2004
Flash:      Fri Dec 17 04:59:44 2004
BootProm:   4.5.0

Lizenz prüfen: licenseshow

SddRRed9R9TeeSSF:
    Web license
be9SR9ybbRcfATSN:
    Zoning license
bcbzebcy9dcdd0fv:
    2 Domain Fabric license
bbySySdybeeczTzZ:
    Zoning license
    QuickLoop license
    Fabric license
    Fabric Watch license

Konfigurationsbackup

Einen Konfigurationsbackup kann man mittels FTP durchführen. Hierzu gibt man unter SwitchExplorer → Fabric (FabricName) → Admin (Symbol) die entsprechenden Daten ein.

Alternativ funktioniert auch der Befehl cfgShow.

cfgShow

Defined configuration:
 cfg:   cfg     Linux_Clu; EXchn
 zone:  EXchn   Exchange
 zone:  Linux_Clu
                Linux_Cluster
 alias: Exchange
                20:06:00:a0:b8:16:90:0b; 20:07:00:a0:b8:16:90:0b;
                20:06:00:a0:b8:16:90:0a; 20:07:00:a0:b8:16:90:0a;
                21:00:00:11:25:92:03:e4; 21:00:00:11:25:92:03:e5
 alias: Linux_Cluster
                20:06:00:a0:b8:16:90:0b; 20:07:00:a0:b8:16:90:0b;
                20:06:00:a0:b8:16:90:0a; 20:07:00:a0:b8:16:90:0a;
                21:00:00:11:25:92:05:72; 21:00:00:11:25:92:05:73;
                21:00:00:11:25:92:05:42; 21:00:00:11:25:92:05:43

Effective configuration:
 cfg:   cfg
 zone:  EXchn   20:06:00:a0:b8:16:90:0b
                20:07:00:a0:b8:16:90:0b
                20:06:00:a0:b8:16:90:0a
                20:07:00:a0:b8:16:90:0a
                21:00:00:11:25:92:03:e4
                21:00:00:11:25:92:03:e5
 zone:  Linux_Clu
                20:06:00:a0:b8:16:90:0b
                20:07:00:a0:b8:16:90:0b
                20:06:00:a0:b8:16:90:0a
                20:07:00:a0:b8:16:90:0a
                21:00:00:11:25:92:05:72
                21:00:00:11:25:92:05:73
                21:00:00:11:25:92:05:42
                21:00:00:11:25:92:05:43

20:06:00:a0:b8:16:90:0b ist hier der scsi-qla0-adapter-node des QLogic HBA, 21:00:00:11:25:92:05:72 ist der scsi-qla0-adapter-port.

(Kann durch cat /proc/scsi/qla2xxx/{adapternummer} sichtbar gemacht werden (”SCSI Device Information”)).

Firmware-Update

(Siehe auch 4-10 Fabric OS Administrator’s Guide, Publication Number: 53-0000518-09, Maintaining Firmware 4).

Verify that the FTP service is running on the host server and that you have a user ID on that server.
Obtain the firmware file from the Brocade Web site at http://www.brocade.com and store the file on the FTP server. Verify that the FTP service is running and unpack the compressed files preserving directory structures.
Use the firmwareShow command to check the current firmware version on connected switches. Upgrade their firmware if necessary before proceeding with upgrading this switch. Refer to “Checking Connected Switches” on page 4-6.
Connect to the switch and log in as admin. Note: After you start the process, do not enter any disruptive commands (such as reboot) that will interrupt the process. The entire firmware download and commit process takes approximately 17 minutes. If there is a problem, wait for the timeout (30 minutes for network problems; 10 minutes for incorrect IP address). Disrupting the process can render the switch inoperable and require you to seek help from Customer Support. Do not disconnect the switch from power during the process, because the switch could become inoperable upon reboot.
Use the firmwareShow command to check the current firmware version of the switch to verify compatibility with the version of firmware you are going to download.
Enter the firmwareDownload command.
At the “Do you want to continue [y/n]” prompt, enter y.
Respond to the prompts as follows:
- Server Name or IP Address 1)
- User name 2)
- File name 3)
- Password 4)
- After the firmware is downloaded, the switch reboots and starts the firmware commit.
After the reboot, connect to the switch and log in again as admin.
If you want to watch the upgrade progress, enter the firmwareDownloadStatus command.
After the firmware commit finishes, enter the firmwareShow command to display the firmware level for both partitions.

Update Prozess

:!: ftproot ist hier /home/brocade/v5.0.4a

firmwareDownload

You can run firmwareDownloadStatus to get the status
of this command.

This command will cause the switch to reset and will
require that existing telnet, secure telnet or SSH
sessions be restarted.

Do you want to continue [Y]: y
Server Name or IP Address: 10.100.100.241
User Name: tirili
File Name: release.plist
Password:
Firmwaredownload has started.
Start to install packages......
dir                         ##################################################
ldconfig                    ##################################################
glibc                       ##################################################
bash                        ##################################################
readline                    ##################################################
terminfo                    ##################################################
termcap                     ##################################################
setup                       ##################################################
swbd12-setup                ##################################################
which                       ##################################################
findutils                   ##################################################
bzip                        ##################################################
zlib                        ##################################################
chkconfig                   ##################################################
fileutils                   ##################################################
sed                         ##################################################
textutils                   ##################################################
procps                      ##################################################
...
fabos                       ##################################################
fabos-zoning                ##################################################
fabos-fw                    ##################################################
fabos-hmon                  ##################################################
fabos-wwnhs                 ##################################################
fabos-swbd27                ##################################################
mmlib                       ##################################################
apache                      ##################################################
fastcgi                     ##################################################
fabos-webtools              ##################################################
fabos-webtoolsez            ##################################################
tz                          ##################################################
mtracer-tool                ##################################################
lkcd                        ##################################################
sysstat                     ##################################################
Write kernel image into flash.
...............................
Verification SUCCEEDED
Removing unneeded files, please wait ...
All packages have been downloaded successfully.
Firmwaredownload has completed successfully.
HA Rebooting ...

1) Enter the name or IP address of the server where the firmware file is stored; for example, 192.1.2.3. You can enter a server name if DNS is enabled.

2) Enter the user name of your account on the server; for example, “JohnDoe”.

3) Specify the full path name of the firmware directory, appended by release.plist; for example, /pub/v5.0.1/release.plist. Note: For v4.x and v5.x switches only, do not attempt to locate the release.plist file in the top level directory; there is a release.plist file for each platform, and the correct one is automatically selected.

4) Enter your account password for the server.

IBM SAN Switch Update Prozedur (Brocade)

Update Prozedur

Konfigurationsbackup

Firmware-Update

Update Prozess

Navigation

aktuelle_ebene