cpconfig
Welcome to Check Point SecurePlatform Pro NGX (R60)
This wizard will guide you through the initial
configuration of your SecurePlatform device.
Network Configuration
------------------------------------------------------------------
1) Host Name 3) Domain Name Servers 5) Routing
2) Domain Name 4) Network Connections
------------------------------------------------------------------
(1)
------------------------------------------------------------------
1) Set host name
2) Show host name
------------------------------------------------------------------
Your choice: 1
Enter host name: ngx01
Enter IP of the interface to be associated with
this host name (leave empty for automatic assignment): 192.168.111.2
The host name is set.
(2)
------------------------------------------------------------------
1) Set domain name
2) Show domain name
------------------------------------------------------------------
Your choice: 1
Enter domain name: test.easycluster.de
The domain name is set.
(3)
Choose a DNS configuration item ('e' to exit):
------------------------------------------------------------------
1) Add new domain name server 3) Show configured domain name servers
2) Remove domain name server
------------------------------------------------------------------
Your choice: 1
Enter IP address of the domain name server to add: 194.25.2.129
(4)
Choose a network connections configuration item ('e' to exit):
------------------------------------------------------------------
1) Add new connection 4) Select management connection
2) Configure connection 5) Show connection configuration
3) Remove connection
------------------------------------------------------------------
Your choice: 5
Choose a connection to display ('e' to exit):
------------------------------------------------------------------
1) eth0
2) eth1
3) lo
------------------------------------------------------------------
Your choice: 1
eth0 ip: 192.168.111.2, broadcast: 192.168.111.255, netmask: 255.255.255.0
This connection is currently the management interface.
------------------------------------------------------------------
Your choice: 1
Choose a connection type to add ('e' to exit):
------------------------------------------------------------------
1) Secondary IP on interface (alias) 4) PPPoE connection
2) VLAN 5) PPTP connection
3) Loopback connection 6) ISDN connection
------------------------------------------------------------------
Your choice: 2
Choose a connection to configure ('e' to exit):
------------------------------------------------------------------
1) eth0
2) eth1
------------------------------------------------------------------
Your choice: 2
Choose eth1 item to configure ('e' to exit):
------------------------------------------------------------------
1) Change IP settings 3) Remove IP from interface
2) Change MTU settings 4) Change from static to dynamic IP
------------------------------------------------------------------
Your choice: 1
Enter IP address for eth1 (press 'c' to cancel): 192.168.200.1
Enter network mask of the interface eth1 (press 'c' to cancel): 255.255.255.0
Enter broadcast address of the interface eth1 (leave empty for default): 192.168.200.255
The interface is configured.
Current interface configuration is:
eth1 ip: 192.168.200.1, broadcast: 192.168.200.255, netmask: 255.255.255.0
Your choice: n
Choose a time and date configuration item:
------------------------------------------------------------------
1) Set time zone 3) Set local time
2) Set date 4) Show date and time settings
------------------------------------------------------------------
Press "q" for Quit, "p" for Previous, "n" for Next
------------------------------------------------------------------
Your choice: 1
Identify a location so that time zone rules can be set correctly.
Select a continent or ocean.
8) Europe
#? 8
Select a country.
15) Germany 30) Norway 45) cancel
#? 15
The following information has been given:
Germany
Therefore TZ='Europe/Berlin' will be used.
Is the above information OK?
1) Yes 2) No 3) Cancel
#? 1
Updating time zone succeeded.
Time zone is set.
- Next
Your choice: n
Import Check Point Products configuration:
------------------------------------------------------------------
1) Fetch import file from TFTP server
------------------------------------------------------------------
- Next
Your choice: n
